WikiNano.
Jet Engine Lab
Jet Engine Lab

Every jet engine does four things to air, continuously, tonnes of it every second. This lab lets you take one apart, run it, push it until it fails, and then fly the aircraft it carries.

62% N1 Drag across the engine to throttle it. Tap a word above to see where it happens.
1,700 °C
Gas hitting the first turbine blades. That is about 200 °C above the blade metal's melting point.
134,300 lbf
Record thrust of a GE9X on test in 2017, about 597 kN from one engine.
61 : 1
Pressure rise inside the GE9X, the highest of any airliner engine.
About 80%
Share of a modern airliner engine's thrust that comes from cool fan air, not the hot core.
Part 1How it works

1Thrust is a reaction

An engine throws air backwards. The air pushes the engine forwards with exactly the same force. That is Newton's third law, and it is the whole trick. The thrust depends on how much air you throw and how much faster you make it go.

400 kg/s
330 m/s
230 m/s
F = ṁ × (Ve − V0)
Thrust
0 kN
Propulsive efficiency
0%
Energy left in the wake
0 MW

Challenge. Make at least 120 kN while cruising at 230 m/s, and waste as little energy as you can. Above 80% efficiency you have invented the turbofan.

2Take a turbofan apart

A real-time model of a two-spool, high-bypass turbofan of the kind that powers most airliners. Cut it open, explode it, colour it by temperature, start it up and watch the air go through.

  • Click any part to see what it does and how hot it gets.
  • Open Run it and start the engine the way pilots do. Try the manual start and cause a hot start on purpose.
  • Open Air's journey to ride along with one parcel of air.
N1 fan0%
N2 core0%
EGT15 °C
Thrust0 kN
Drag to rotate. Scroll or pinch to zoom. Click a part.

3Follow one breath of air

Drag the parcel through the engine. The charts show what happens to its pressure, temperature and speed at every point. Engineers number the stations along the way, from 0 in the open air to 9 at the nozzle exit.

Intake

Air speeds up into the intake

Pressure
1.0 bar
Temperature
15 °C
Speed
0 m/s
Density vs outside
1.0×

The Brayton cycle, live

The same parcel traced on the two classic diagrams. The area inside each loop is the useful work you get from one kilogram of air. Squeeze harder or burn hotter and watch the loop change.

40 : 1
1,477 °C
Thermal efficiency (this model)
0%
Ideal Brayton limit
0%
Fuel per kg of core air
0 g
Core jet speed
0 m/s

Temperature–entropy
Pressure–volume (log scales)

4One idea, many engines

Every air-breathing jet compresses air, adds heat and expands it. What changes is how much air goes around the hot core, what the turbine drives, and how fast the aircraft flies.

Which engine wins at which speed?

Mach 0.80

Part 2Engineer it

5Design your own engine

This is the same kind of cycle calculation engine designers run first. Pick the bypass ratio, how hard to squeeze, how hot to burn and how big the fan is. Then send it on a mission.

Start from
11 : 1
40 : 1
1,477 °C
1.98 m
1.45
Flight condition
Thrust
0 kN
Fuel use (TSFC)
0
Fuel flow
0 kg/h
Air through engine
0 kg/s
Thermal efficiency
0%
Propulsive efficiency
0%
Overall efficiency
0%
Jet noise index
0 dB
    The big trade-off: thrust per kilogram of air against fuel burned. Each dot on the line is one bypass ratio.

    Missions

    Each mission fixes the flight condition and scores your current design.

    6When a compressor stalls

    Every compressor blade is a small wing. Ask it to push air against too much pressure and it stalls like a wing does. If enough blades stall at once, the flow reverses with a bang. Pilots call it a compressor stall. Engineers call it surge.

    • Slam the throttle with the FADEC protection switched off.
    • Add a crosswind gust or blade damage and see the safety margin shrink.
    • Recover by pulling the throttle back or opening the bleed valves.
    70%
    Spool speed
    70%
    Surge margin
    0%
    Blade incidence
    0°

    Stable

      7Hotter than melting

      The first turbine blades sit in gas hotter than the melting point of their metal while spinning at more than 12,000 rpm. They survive because cooler air from the compressor flows through them and out of hundreds of tiny holes, and because a ceramic coating insulates the metal.

      1,600 °C
      12,500 rpm
      Hottest metal
      0 °C
      Margin to material limit
      0 °C
      Estimated blade life
      0 h
      Cooling air used
      0%
      Pull on each blade
      0 t
      Blade tip speed
      0 km/h

      The cooling gap. Since about 1960 the gas has been hotter than the blades can stand, and cooling has made up the difference. Approximate trend.

      8Why airliners fly so high

      Thin air means less drag, so the same thrust carries the aircraft faster. Cold air also helps the engine's efficiency. But climb too high and the slowest safe speed meets the fastest safe speed. Move the aircraft up and down to find the sweet spot.

      35,000 ft
      Outside air
      0 °C
      Air pressure
      0 hPa
      Air density vs sea level
      0%
      Speed of sound
      0 km/h
      True speed at Mach 0.78
      0 km/h
      Max thrust vs take-off
      0%
      Drag at Mach 0.78
      0 kN
      Fuel per 100 km
      0 kg

      Flight envelope of a 65-tonne narrow-body. The coffin corner is where the two limits meet.
      Fuel burned per 100 km at Mach 0.78.
      Part 3Fly it

      9Flight deck simulator

      A twin-engine airliner with the engines from this lab under its wings. Pick a lesson and the instructor walks you through it, or fly freely. The physics include real lift, drag, spool-up lag, fly-by-wire protection and an autopilot that can land by itself.

      PitchElevators on the tail. Pull back to raise the nose.

      S or ↓ nose up, W or ↑ nose down

      RollAilerons and spoilers bank the aircraft. Banking is how it turns.

      A D or ← →

      YawThe rudder swings the nose. Used in crosswinds and after an engine failure.

      Q E

      ThrustThrust levers set N1. The engines need several seconds to spool up.

      + − or detents 1 to 4

      Lift and dragFlaps for slow flight, speed brakes to slow down, gear for landing.

      F V flaps, G gear, / speed brake

      Choose a lesson

      Keyboard: click the view first. Touch: steer with the stick, use the THR buttons for thrust.

      PFD
      ND
      Engines
      TOGAFLXCLIDLE
      Flaps
      Gear Speed brake Wheel brakes
      SPD250
      HDG360
      ALT5000
      Flight control law
      Speeds at this weight
      Weight
      64.0 t
      Stall speed now
      -
      Lowest safe (VLS)
      -
      Maximum now
      -
      Take-off V1, VR, V2
      -
      Approach, flaps full
      -

      More flap lowers the stall speed. More weight raises every speed, because the wing must make more lift.

      All keyboard controls
      S/↓ nose upW/↑ nose downA/← D/→ rollQ E rudder + − thrust1 idle 2 climb 3 flex 4 TOGAF flaps down V flaps upG gear / speed brakeSpace wheel brakesB parking brakeR reverse thrust (hold) U autopilotC cameraP pauseEsc release keyboard
      Part 4Its story

      10From a steam toy to 134,300 lbf

      Two thousand years separate the first reaction engine from today's record holder. Most of the progress happened in the last eighty. Scrub through the timeline.

      Thrust of landmark engines, log scale. Hover a dot.

      11Records and torture tests

      Engines carry a data plate with their identity. These are the plates of the record holders, followed by the punishment every new engine has to survive before anyone may fly behind it.

      How fast is the fan tip?

      1.98 m
      3,900 rpm

      0 km/h

      How much air?

      1,500 kg/s

      0 m³/s

      Olympic pool, 2,500 m³

      To scale

      Hover a shape. One grid square is 1 m.

      The torture chamber

      Certification tests are run on real engines, and some of them end with the engine destroyed. Pick a test and fire it.

      12What comes next

      Engines today burn far less fuel per seat than the first jets, but aviation still runs on kerosene. The next steps are even bigger fans, new fuels and possibly no fuel at all. Compare where each idea stands in 2026.

      CO₂ per passenger

      1,500 km
      Fuel in the tanks

      Illustrative averages: fuel per passenger-km by aircraft generation, 3.16 kg CO₂ per kg of kerosene, and about 80% lower life-cycle CO₂ for the SAF share. Real flights vary with aircraft, load and route. Contrails and NOx add warming that this chart does not count.

      13Check yourself

      Twelve questions about everything above, a deck of popular myths, and a glossary of the words engine people use.

      Myth or fact?

      Tap a card to flip it.

      Glossary

      About Jet Engine Lab

      An interactive jet engine lab: a 3D turbofan to take apart, thrust and thermodynamics sandboxes, compressor stall, turbine cooling, engine families, history and a flyable jet simulator.

      Topic: Jet engines and turbofans · Format: interactive lab: 3D engine, sandboxes and flight simulator · Free, no sign-up · Updated 2026-11-19 · By Prince Vincent, WikiNano · Last reviewed 2026-11-19.

      Inside this page

      Common questions

      How does a jet engine make thrust?
      It sucks air in, squeezes it in the compressor, burns fuel in it and blows the hot gas out of the back much faster than it came in. Pushing that air backwards pushes the engine forwards (Newton’s third law). In a modern turbofan most of the thrust comes from the big front fan.
      Why don’t the turbine blades melt?
      The gas reaching the first turbine blades is hotter than the blade metal’s melting point. The blades are grown as single nickel-alloy crystals, coated with ceramic and cooled from inside by air from the compressor that leaks out through tiny holes and wraps them in a cool film.
      Why do airliners cruise at about 11 km?
      The air is thin there, so drag is much lower, and the cold air makes the engine more efficient. Cruising high also keeps the aircraft above most weather.

      Sources and further reading

      Keep exploring