Digital
An electronic image sensor replaces film. Millions of light-sensitive photosites turn light into numbers you can store, review and edit.
See how a DSLR turns light into a photograph, from the flip of the mirror to the last pixel on the card. Then practise on a virtual camera until the settings feel natural.
A DSLR is a camera where you look through the same lens that takes the picture. A tilted mirror sends the image up to your eye, then gets out of the way the instant you press the shutter.
An electronic image sensor replaces film. Millions of light-sensitive photosites turn light into numbers you can store, review and edit.
One lens does two jobs: it forms the image you see in the viewfinder and the image the sensor records. No parallax error between the two.
The lens is interchangeable. Swap a wide-angle for a telephoto, a fast prime or a macro, and the same body becomes a different tool.
A mirror at 45° reflects light up into a pentaprism and out through the eyepiece. "Reflex" is the old word for that reflection.
Light passes through the lens, bounces off the mirror and the pentaprism, and reaches your eye with no delay.
Part of the light slips through the mirror to the autofocus sensor. Another sensor near the eyepiece measures brightness.
The mirror flips up, the aperture closes to your setting and the shutter curtains expose the sensor for exactly the shutter time.
The sensor's charges are read out, converted to numbers, coloured, sharpened and saved as RAW or JPEG on the card.
Every DSLR principle on this page still applies to mirrorless cameras: aperture, shutter speed, ISO, focus, lenses and light work the same way. The market, though, has moved on.
This is a slice through a DSLR with a 50mm lens. Follow the yellow light. Half-press to focus, take a photo in slow motion, or walk through it one step at a time. Click any part to learn what it does.
Each photosite only measures brightness. A mosaic of red, green and blue filters (the Bayer pattern, with twice as many green) sits on top, and the processor rebuilds full colour by borrowing from neighbours. Hover the image to inspect single photosites.
Hover a photosite
This is why a 24-megapixel sensor has 24 million photosites but only measures one colour at each. Demosaicing guesses the other two, which is also why fine repeating patterns can produce false colour (moiré).
Every DSLR maker labels things a little differently, but the layout is remarkably similar. Tap a numbered marker, or pick from the list, to learn what each control does.
The red markers show the controls you will use most. Start with the mode dial and the shutter button.
Exposure is how much light ends up in your photo. Three settings control it, and each one has a side effect you can see. Learning to trade them against each other is most of photography.
Aperture is the size of the hole in the lens. A wide aperture (small f-number like f/1.8) lets in lots of light and blurs the background. A narrow one (f/16) lets in little light and keeps everything sharp.
Shutter speed is how long the sensor sees light. Fast speeds (1/1000 s) freeze motion. Slow speeds (1 s) let moving things blur, and need a tripod.
ISO is how strongly the camera amplifies the signal. Raising it brightens the photo without changing aperture or shutter, but adds grainy noise.
Each full step on any of these is called a stop. One stop doubles or halves the light, so you can swap one stop of aperture for one stop of shutter speed and keep the same brightness.
A cyclist rides past a row of shops. Change the three settings and watch the photo. Turn on Lock exposure and the camera keeps brightness constant, so you only see the side effects.
The f-number is the focal length divided by the diameter of the opening. On a 50mm lens, f/2 means a 25mm hole and f/16 a hole just over 3mm. That is why bigger numbers mean smaller openings.
The standard full stops are f/1.4, 2, 2.8, 4, 5.6, 8, 11, 16 and 22. Each one halves the light of the one before, because the area of the hole halves.
Depth of field is the zone that looks sharp. Wide apertures make it thin, which isolates a subject. Narrow apertures make it deep, which suits landscapes. Most lenses are sharpest around f/5.6 to f/8; beyond f/16, diffraction starts to soften everything.
Shutter speed is written as a fraction of a second. Each step on the full-stop scale (1/1000, 1/500, 1/250, 1/125...) doubles the time and the light.
Inside a DSLR, two curtains travel across the sensor. At slow speeds the first curtain opens fully before the second follows. At fast speeds they move together as a narrow slit, which is how a camera reaches 1/8000 s.
The camera keeps the brightness the same here by shortening the shutter time as you raise ISO. Look at the shadows: noise appears first in the dark areas, as speckles of grain and colour.
Base ISO (usually 100) gives the cleanest files. Raise ISO when you need a faster shutter or a smaller aperture and have no more light to work with. A sharp, slightly noisy photo beats a clean, blurry one.
| Light | Aperture | Shutter | ISO |
|---|
Cameras also offer third-stop steps between these (f/3.2, f/3.5, 1/160, 1/200, ISO 125, 160...), so you can fine-tune.
Change each setting by whole stops. The bar shows the total change in brightness.
Total: 0 stops (same brightness)
EV combines aperture and shutter into one number. EV 15 is bright sun at ISO 100 (f/16 at 1/125). Every EV is one stop. Typical scenes: snow in sun EV 16, overcast EV 12, indoors EV 6, street at night EV 4, Milky Way EV −7.
The camera's light meter assumes the world averages out to middle grey. It is usually right and sometimes badly wrong. These three tools tell you when to trust it.
A sunset with a person on the hill. Switch modes and see what the meter decides. In spot mode, click the photo to move the spot.
The histogram is a bar chart of every pixel's brightness, dark on the left and bright on the right. Drag the exposure compensation and watch the mountain of data slide.
Every light source has a colour, measured in kelvin. Candles are orange, shade is blue. White balance tells the camera what colour the light is, so white things come out white.
A lens can only focus at one distance. Depth of field is how far in front of and behind that distance things still look sharp, and you control it with aperture, focal length and distance.
Five lawn-chess pawns stand 1.5 m to 15 m away. Set the lens and focus distance. The green band shows the zone of acceptable sharpness.
Pick a focus mode and an area mode. The viewfinder shows which AF points the camera uses as the bird flies.
Through the viewfinder, a DSLR uses phase detection: it measures how far out of focus the image is and in which direction, then drives the lens straight there. In live view many DSLRs fall back to contrast detection, which hunts back and forth looking for peak sharpness.
In portraits of people and animals, the nearer eye must be sharp. Everything else can soften.
Rather than focus and recompose, move the active point onto your subject. Recomposing at wide apertures can shift focus off the eye.
Move autofocus to the AF-ON button. Your thumb focuses, your finger shoots, and you can switch between tracking and locking instantly.
Zoom the live view to 10× on your subject and turn the focus ring until edges snap sharp. Ideal for stars, macro and landscapes on a tripod.
Focus at the hyperfocal distance and everything from half that distance to infinity looks sharp. Great for landscapes and street work.
For macro and product shots, take several frames at different focus distances and blend them in software for front-to-back sharpness.
Focal length decides how much of the scene you see. Sensor size decides how that lens behaves. Together they shape every photo before you touch a setting.
Stand in one spot and turn the zoom ring from 14mm to 400mm (full-frame equivalent). The boxes on the wide view show what each focal length captures.
Keep the person the same size by stepping back as you zoom in. The mountains seem to grow and press closer. The lens does not cause this; the change of distance does.
Wide lenses up close exaggerate noses and make rooms feel big. Short telephotos (70 to 135mm) from a few metres away are flattering for faces and make backgrounds look bigger and closer.
Lens names pack a lot into a few characters. Pick an example and tap each part.
Each code means something about focal length, brightness, stabilisation or the motor.
Smaller sensors crop the image from the centre of the lens. Multiply the focal length by the crop factor to get the full-frame equivalent view.
The mode dial decides who controls what. Turn it and see which settings stay yours and which the camera takes over.
Same scene, same 35mm lens, ISO 100. Slide the scene brightness and compare.
A virtual DSLR with real physics: depth of field from your lens and aperture, motion blur from your shutter speed, noise from ISO, camera shake if you hold it too long. Pick a challenge, set the camera on the right, tap the picture to focus, then press the red shutter button.
Dark glass over the lens: lets you use slow shutter speeds in bright light.
Composition is where you put things in the frame. These guidelines are not laws, but they explain why some photos feel balanced and others feel accidental.
Photography means "drawing with light". The direction, softness and colour of light matter more than any setting on the camera.
Drag through a day. Watch the colour of the light, the length of the shadows and the mood change.
Move the light around the subject and change its size. Big sources (a window, a cloudy sky, a softbox) give soft shadows. Small ones (bare flash, midday sun) give hard shadows.
From a box with a pinhole to a phone with five lenses, every camera does the same thing: let light onto something sensitive for a controlled time. Here is how the main types differ.
Typical ranges. Individual models vary.
Four quick questions. The answer is a type of camera, not a brand.
The camera started as a dark room with a hole in the wall. It took two thousand years to learn how to keep the image, and less than two hundred to put one in every pocket.
Good starting settings for common subjects. They are where to begin, not rules: check the result, then adjust. Cards with a camera button open the matching challenge in the practice shoot.
The arithmetic photographers do in their heads, done for you. Every answer updates as you type.
Most disappointing photos fail for one of a handful of reasons. Pick the symptom and work through the likely causes.
This photo was overexposed by 1.7 stops. A JPEG throws away what it cannot show; a RAW file keeps the extra highlight data. Pull the highlights back and compare.
RAW files store 12 or 14 bits per channel straight from the sensor, around 4,000 to 16,000 levels instead of JPEG's 256. You can fix white balance and recover a stop or two of highlights or several stops of shadows. The cost is bigger files and the need to edit before sharing.
Ask any photography question, or upload one of your own photos for a friendly critique. Answers come from Claude and use your own Claude account.
Drop a JPEG here or choose a file. If it has camera data (EXIF), the settings are read and included.
Twenty questions covering everything on this page. Every answer comes with an explanation.
One small assignment a day with your own camera. Ticks are saved in this browser.
The vocabulary of photography in plain words.